Water in the pool can be heated in several different ways, and you can decide yourself what amount you can invest and what will cost you in the future.
Heaters of this type have a stainless steel housing.Heating element ismade by special material, Inkoloy. This ensures stability in chlorinated and acidic environments, such as swimming pools. The heater has a built-in thermal protection from overheating and built-in pressure gauge (presostat) – low or no flow protection. For additional protection can be installed and flow sensor (2) connected to a PCB and a power supply, which additionally protects the heater from inclusion when the water flow is missing.
They are connected to the local heating of the dwelling (boiler) or central heating.
Heat exchangers are used in the presence of central heating system of hot water. Hot water heating system through the primary loop and heats water in the secondary loop, comes from the pool. Made from high quality stainless steel V4A (1.4571/AISI 316 Ti). There is a place to install an electronic temperature sensor – f15 x 0.75 x 50. The kit includes mounting brackets. Links are 50 mm x 1.5 “or 60 mm x 2. Working pressure: Round hot water – 10 bar, round pools of water – 3 bar.
Through pump water from the pool shall be filed in the collectors, there is heated by radiation energy of the sun and returned to the heated pool. This cycle is repeated until reaching the desired temperature.
VACUUM SOLLAR COLLECTORS
Vacuum tube solar collectors are used year round. They are effective in cloudy weather and at night. They receive the energy of direct and diffuse radiation can be used to heating water in swimming pools.
Highly effective means of heating water`in the pool.
It works well-known principle of thermodynamics: using the large reservoir of heat on Earth and its atmosphere, the heat pump extracts heat from the sun and released it to the water in the pool.
Operating costs are 5 ÷ 6 times lower than electric heaters.
To quickly heat water.